Agilent 8753ET vector network analyzer can be a low cost RF device evaluation. Agilent 8753ET, including an integrated synthesis of the source, test equipment and tuner receiver. Built-in transmission or reflection (T / R) test set to provide a full range of positive amplitude and phase measurements.

300kHz to 3 or 6 GHz
110 dB dynamic range
4 Display Channel
Frequency and power sweep
Optional time-domain, harmonics measurement
8753ET, and 8753ES RF network analyzer to meet the research laboratory or production test requirements, in terms of speed, performance and ease of use to provide an unparalleled combination. 8753ET, and 8753ES for its coverage of 3 or 6GHz frequency range of integrated S-parameter test set, up to 110dB dynamic range and frequency sweep and power sweep for the characterization of active or passive networks, components and subsystems of linear and non-linear sexual characteristics provides a high-performance solution.

Product features
Select transmission / reflection analyzer (ET-type) or the S parameter analyzer (ES) allows you to choose for your application performance and the relationship between the price of the best. Network analyzer is characterized by two independent measurement channels, which can measure and display all four S parameters. You can choose to use amplitude, phase, group delay, Smith chart, polar coordinates, standing wave ratio or time-domain reflection and transmission format to display any combination of parameters. Easy to use dedicated function keys to quickly access the various measurements. Can use up to four scale grid in the high-resolution LCD color display to overlap or separation in the form of screen surface to observe the measurements. In order to drive a larger external monitor in order to facilitate observation, an increase is compatible with the VGA output.
Test sequence function allows one type to quickly and repeatedly perform complex tasks. In the sequential mode of work, simply measure from the panel once, analyzer will be able to save typing, so no additional programming. Can also use the test sequence through the parallel or GPIB port for external device control.
To measure mixers, tuners, and other frequency conversion devices, the frequency offset to allow work on the network analyzer is independent of receiver tuning. Analyzer is easy to scan a fixed intermediate frequency or IF test conversion loss is accomplished, phase, group delay and mixers measuring a unified tone.
Power meter calibration to absolute input or output level-sensitive devices to provide steady increase of absolute power. 8753ET/ES automatically 436A, 437B, 438A E4418B or E4419B power meter is controlled so that in the test system, the power can be transferred to any premises with a power meter accuracy, or the network analyzer receiver to carry out a precise absolute calibration power measurement.
Other high-productivity features include support for LIF, DOS JPEG, and comma separated variable (CSV) format, built-in floppy disk drive, nonvolatile memory, serial and parallel interfaces, DIN keyboard interface as well as print output and document the time record real-time clock. Also includes the limits of testing, random testing, and marking the frequency tracking. Scanning works by using the list to select specific frequencies to be tested and in each frequency range for an independent IF bandwidth and power level, you can shorten the measurement time. Sub-calibration and interpolation error correction can improve the frequency range analyzer has a certain section of the school on a vector accuracy. 8753ET/ES with the 8753D / E as a code-compatible, so no need to modify existing software.
The use of options 010, can be observed in the time domain response to the reflection or transmission. The frequency-domain data analyzer inverse fast Fourier transform calculation to show the reflection coefficient or transmission coefficient with time-varying relationship. Two kinds of time-domain analysis methods that can be observed step response of the device or the impulse response. Timing strobe can be used to remove some do not want to respond, such as the joint mismatch, gating results in the time domain or frequency can be displayed.
S parameter network analyzer and time domain features a combination of the tuning resonator band-pass filter provides a simple deterministic method. Will be reflected in the time domain filters tuned to respond with the appropriate filter response comparison, can reveal what needs to adjust tuning resonator or coupling. The use of time-domain filter tuning, it is easy for this complex task of training new personnel, and greatly simplify the fine tuning and troubleshooting steps.
In order to carry out more advanced device characterization, an increase of 002 selected pieces of harmonic measurement functions. Either directly or in dBc relative to the fundamental frequency of the number of scans show second amplifier and the total harmonic levels. Pressing a button, you can measure up to-40dBc harmonics.
High-stability frequency reference (Option 1D5) increased the high-Q devices, such as surface acoustic wave (SAW) devices, crystal resonator or dielectric resonator filter frequency measurement accuracy.

ET-type
8753ET feature is to provide a variety of amplitude and phase measurement of the built-in 50Ω transmission / reflection (T / R) test equipment. Frequency range from 300KHz to 3 or 6GHz. T / R function was measured in the measurement device can give very high precision and very convenient. The additional response to calibrate the transmission measurement can be the source match the impact of the amendment. Option 004 will be standard parts -20 ~ +5 dBm source power extended to -85 ~ +10 dBm.
ES-type
8753ES feature is to provide a variety of built-in amplitude and phase measurement of 50 or 75ΩS parameter test equipment. Full two-port error correction feature provides a very high accuracy standards, S parameter test set is easy to be positive, the reverse sweep measurement, without inversion device under test. In order to improve configuration flexibility, options 011 abolished the built-in test equipment in order to be able to choose the required test equipment. 8753ES Option 011 with 85046A / B and 85047A S-parameter test set, as well as for other special applications supporting the use of special test equipment. Option 014 provides maximum flexibility in order to obtain the test device can be configured. In order to carry out the non-coaxial system, convenient and accurate measurements, special offers TR * / LRM * calibration. Removed the use of built-in configurator suitable calibration technique, but also for non-plug-in devices to achieve high-precision measurements.
Main technical data
8753 ET / ES Network Analyzer Product Manual, P / n 5968-5159E
8753 ET / ES Network Analyzers technical indicators, P / n 5968-5160E
8753 ET / ES Network Analyzers Configuration Guide, P / n 5968-5158E

Ordering Information
Note: A complete system consists of network analyzer, calibration accessories, and cable. Calibration accessories and cables in the accessories section.

8753ET Network Analyzer, 300KHz ~ 3GHz
Option 002 harmonic measurement function
Option 004 built-in step attenuator
Option 006 6GHz frequency extension
Option 010 Time Domain Function
Option 1D5 high-stability frequency-based school
8753ES Network Analyzer, 30KHz ~ 3GHz
Option 002 harmonic measurement function
Option 006 6GHz frequency extension
Option 010 Time Domain Function
Option 011 built-in test equipment to remove
Option 014 Configurable test set
Option 075 75Ω impedance
Option 01D5 high-stability frequency reference
85047A 50ΩS parameter test equipment, 6GHz
Option 009 mechanical test port switch
Option 913 Rack mount brackets (5062-4069)
85046A 50ΩS parameter test equipment, 3GHz
Option 009 mechanical test port switch
Options 913 mechanical installation accessories (5062-4069)
85046B 75ΩS parameter test equipment, 300KHz, 2GHz
Option 009 mechanical test port switch
Option 913 Rack mount brackets (5062-4069)
After the initial purchase, through the ordering of the following upgrade components in one of the options can be added to the 8753E system network analyzer. Order to upgrade components, make the instrument, after the model number that the upgrade "U" and you want to change options.

8753ET Upgrade Parts
Option 002 Upgrade Parts harmonic measurement
Step Attenuator Option 004 Upgrade Parts
Option 006 upgrade parts standard parts 6GHz
Option 010 Time Domain Upgrade Parts
Option 099 Firmware Upgrade Parts
Optional high-stability frequency reference 1D5 Upgrade Parts
8753ES Upgrade Parts
Option 002 Upgrade Parts harmonic measurement
Option 006 upgrade parts standard parts 6GHz
Option 010 Time Domain Upgrade Parts
Option 099 Firmware Upgrade Parts
Optional high-stability frequency reference 1D5 Upgrade Parts
Option 611 Option 011 upgrade parts of 6GHz